Products

直线步进电机

26DAM-K - 直线步进电机

26DAM-K

26DAM-K 是一种非贯穿式直线执行器,它使用 26 mm 的框架尺寸提供高达 33 N 的直线力。

性能及特点

  • 对尺寸而言的高连续直线力输出

  • 数字控制 - 易于与微处理器结合使用

  • 高成本效率 - 紧凑的设计、集成成本低

  • 免维护 - 无需更换电刷

  • 单极和双极绕组选项

  • 非贯穿式和贯穿式设计

  • 寿命长 - 滚珠轴承设计

按需求定制

  • 线圈变化 - 电阻和电感
  • 磁铁 - 提供较高直线力或降低定位力水平
  • 高强塑料适合较高冲击力
  • 根据应用场合减小或提高定位力
  • 螺杆 - 公制或英制末端,长度
  • 特种法兰、连接器、运动检测传感器
  • 束线 - 连接器、插脚、引线长度、热缩管

典型应用

规格+细节
文件
公制 英制单位
Winding{%|%}unit 26DAMXXD1B-K 26DAMXXD1U-K 26DAMXXD2B-K 26DAMXXD2U-K
Diameter{%|%}in 1.02 1.02 1.02 1.02
Diameter{%|%}mm 26.0 26.0 26.0 26.0
Length (mm)
Length (in)
Operating Voltage #{%|%}V 5.00 5.00 12.00 12.00
Resistance per Phase, ± 10%{%|%}Ohms 14.6 14.6 84.0 84.0
Inductance per Phase, typ{%|%}mH 6.5 3.8 33.6 20.5
Nominal Phase Current, 2 ph. On (A)
Nominal Phase Current, 1 ph. On (A)
Back-EMF Constant (V/1000 rpm)
Back EMF Amplitude (V/ksteps/s)
Holding Torque, MIN (mNm)
Holding Torque, MIN (oz-in)
Holding Torque Typical (mNm)
Holding Torque Typical (oz-in)
Holding Torque, 1.5x nominal current (mNm)
Holding Torque, 1.5x nominal current (oz-in)
Detent Torque, Typical (mNm)
Detent Torque, Typical (oz-in)
Rated Current per Phase, 1 Phase ON{%|%}A 0.48 0.48 0.20 0.20
Detent Torque, Max (mNm)
Detent Torque, Max (oz-in)
Rotor Inertia (kgm²10^-7)
Rotor Inertia (oz-in-sec²10^-6)
Nominal Voltage (Volt)
Optimization (rpm)
No-Load Speed (rpm)
No-Load Current (mA)
Max continuous mechanical power (@ 25°C)
Max continuous Current (A)
Max Continuous Torque (mNm)
Max Continuous Torque (oz-in)
Terminal Resistance (W)
Output Power (W)
Stall Torque (oz-in)
Stall Torque (mNm)
Efficiency (%)
Speeds up to (rpm)
Torque up to (oz-in)
Torque up to (mNm)
Current up to (thermal limits)
Torque Constant (mNm/A)
Torque Constant (oz-in/A)
Motor Regulation R/k² (10³/Nms)
Motor regulation k/R½ (mNm/W)
Motor regulation k/R½ (oz-in/W)
Internal resistance - phase to phase (W)
Line to Line resistance at connectors (Ω)
Inductance - phase to phase (mH)
Friction Torque (onz-in)
Friction Torque (mNm)
Rotor Inductance (mH)
Mechanical Time Constant (ms)
Thermal Time Constant (C/W)
Absolute accuracy 2 ph. On, Full step mode (degree)
Ambient Temperature Range, Operating (°C)
Ambient Temperature Range, Operating (°F)
Rotor Operating Temperature Range (°C)
Rotor Operating Temperature Range (°F)
Max motor speed (rpm)
Ambient storage temperature range (°C)
Ambient storage temperature range (°F)
Ball bearings preload (N)
Axial static force without shaft support (N)
Max winding temperature (°C)
Max Winding Temperature (C)
Max Winding Temperature (°F)
Max winding temperature (F)
Hall Sensor Elecrical Phasing (degree)
Typical Housing Material
Continuous Stall Current (A)
Peak Torque for 1s (mNm)
Peak Torque for 1s (oz-in)
Peak Current (A)
Shaft Load Max Axial (lb)
Shaft Load Max Axial (N)
Shaft Load Max Radial (lb)
Shaft Load Max Radial (N)
Min. Holding Force (Unenergized) @ .0005" (0.0127 mm) / Step{%|%}N
Min. Holding Force (Unenergized) @ .0005" (0.0127 mm) / Step{%|%}oz
Min. Holding Force @ 0.001" (0.0254 mm) / Step (Un-energized){%|%}N 20.0 20.0 20.0 20.0
Min. Holding Force @ 0.001" (0.0254 mm) / Step (Un-energized){%|%}oz 72.0 72.0 72.0 72.0
Min. Holding Force @ 0.002" (0.0508 mm) / Step (Un-energized){%|%}N 13.9 13.9 13.9 13.9
Min. Holding Force @ 0.002" (0.0508 mm) / Step (Un-energized){%|%}oz 50.0 50.0 50.0 50.0
Min. Holding Force (Unenergized) @ 0.003" (0.0762 mm) / Step (Un-energized){%|%}N
Min. Holding Force (Unenergized) @ 0.003" (0.0762 mm) / Step (Un-energized){%|%}oz
Min. Holding Force @ 0.004" (0.1016 mm) / Step (Un-energized){%|%}N 5.6 5.6 5.6 5.6
Min. Holding Force @ 0.004" (0.1016 mm) / Step (Un-energized){%|%}oz 20.0 20.0 20.0 20.0
Min. Holding Force @ rated current @ .0005" (0.0127 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .0005" (0.0127 mm) / Step{%|%}oz
Min. Holding Force @ rated current @ .001" (0.0254 mm) / Step{%|%}N 33.40 20.00 33.40 20.00
Min. Holding Force @ rated current @ .001" (0.0254 mm) / Step{%|%}oz 120.00 120.00 120.00 120.00
Min. Holding Force @ rated current @ .002" (0.058 mm) / Step{%|%}N 25.00 15.30 25.00 15.30
Min. Holding Force @ rated current @ .002" (0.058 mm) / Step{%|%}oz 90.00 90.00 90.00 90.00
Min. Holding Force @ rated current @ .003" (0.0762 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .003" (0.0762 mm) / Step{%|%}oz
Min. Holding Force @ rated current @ .004" (0.1016 mm) / Step{%|%}N 14.50 8.90 14.50 8.90
Min. Holding Force @ rated current @ .004" (0.1016 mm) / Step{%|%}oz 52.00 52.00 52.00 52.00
Stroke Length, Typ{%|%}mm 13.2 13.2 13.2 13.2
Stroke Length, Typ{%|%}in 0.5 0.5 0.5 0.5
Steps per Revolution 24 24 24 24
Ambient temperature range, operating{%|%}°C -20 to +70 -20 to +70 -20 to +70 -20 to +70
Ambient temperature range, operating{%|%}°F -4 to +158 -4 to +158 -4 to +158 -4 to +158
Maximum Coil Temperature{%|%}°F 266 266 266 266
Maximum Coil Temperature{%|%}°C 130 130 130 130
Bearing Type Ball Bearing Ball Bearing Ball Bearing Ball Bearing
Insulation Resistance at 500 VDC{%|%}Mohms 20 20 20 20
Dielectric Withstanding Voltage{%|%}VAC 650 for 2 seconds 650 for 2 seconds 650 for 2 seconds 650 for 2 seconds
Number of lines available
Output signal
Supply Current - maxium (mA)
Supply Current - stand-by (μA)
Supply Current - typical (mA)
Supply Voltage (V)
Direction of rotation ( = / ≠)
Max. Recommended Input Speed (rpm)
Number of gear stages
Number of lines available
Thermal Resistance (C/W)
Natural Resonance Frequency @nominal current (Hz)
Electrical time constant (ms)
Angular Acceleration (nominal current)
Radial Shaft Play (µm)
Axial Shaft Play (µm)
Max Radial Shaft Load (oz)
Max Radial Shaft Load (N)
Max Axial Shaft Load (oz)
Max Axial Shaft Load (N)
Weight{%|%}g 34.0 34.0 34.0 34.0
Weight{%|%}oz 1.20 1.20 1.20 1.20
Leadwire AWG 28, UL 1429 AWG 28, UL 1429 AWG 28, UL 1429 AWG 28, UL 1429
Type of encoder
Power rate, nominal current (kW/s)
Step Angle ± 1 Step ± 1 Step ± 1 Step ± 1 Step
Input Power (W) 3.40 3.40 3.40 3.40
Stepper Type Bipolar Unipolar Bipolar Unipolar
Document Technology Document Type Language File Type
26DAM-K Specification Sheet 直线步进电机 规格说明  
26DAM-K drawing 直线步进电机 DXF图纸  
26DAM-K 3D Drawing 直线步进电机 3D  
About Stepper Linear Actuators (brochure) 直线步进电机 文件资料  
直线步进电机 (中文样本) 直线步进电机 文件资料  
Stepper Linear Actuator Speed vs. Torque Curves specifications 直线步进电机 规格说明