Products

大功率步进直线电机执行器

20DBM-L - 大功率步进直线电机执行器

20DBM-L

20DBM-L 高分辨率贯通式步进直线电机执行器专门用于需要较小运动增量和更精细定位的要求严苛的应用。凭借 7.5 度的步进角,这些大动力直线电机可提供最高达 50N 的直线力。正在申请专利的预加载设计的更大的球轴承,可提供更高的负载能力和重复性。

性能及特点

  • 高等级钕磁

  • 紧凑的设计

  • 绕组选项

  • 更大的球轴承

  • 改进的散热

  • 优化的预加载

按需求定制

  • 较长/较短行程长度
  • 绕组
  • 电缆和连接器
  • 滚珠轴承
  • 预加载/轴向间隙
  • 适配器/加长尖头
  • 安装板

典型应用

Hide Reduce Design Time block (check box for SMS products only) 
规格+细节
文件
公制 英制单位
Winding{%|%}unit 20DBMXXD3B-L 20DBMXXD4B-L 20DBMXXD1B-L 20DBMXXD2B-L
Diameter{%|%}in 0.79 0.79 0.79 0.79
Diameter{%|%}mm 20.0 20.0 20.0 20.0
Length (mm)
Length (in)
Operating Voltage #{%|%}V 2.90 1.40 5.00 12.00
Resistance per Phase, ± 10%{%|%}Ohms 5.7 1.4 17.5 100.5
Inductance per Phase, typ{%|%}mH 2.4 0.5 7.0 45.0
Nominal Phase Current, 2 ph. On (A)
Nominal Phase Current, 1 ph. On (A)
Back-EMF Constant (V/1000 rpm)
Back EMF Amplitude (V/ksteps/s)
Holding Torque, MIN (mNm)
Holding Torque, MIN (oz-in)
Holding Torque Typical (mNm)
Holding Torque Typical (oz-in)
Holding Torque, 1.5x nominal current (mNm)
Holding Torque, 1.5x nominal current (oz-in)
Detent Torque, Typical (mNm)
Detent Torque, Typical (oz-in)
Rated Current per Phase, 1 Phase ON{%|%}A 0.71 1.41 0.41 0.17
Detent Torque, Max (mNm)
Detent Torque, Max (oz-in)
Rotor Inertia (kgm²10^-7)
Rotor Inertia (oz-in-sec²10^-6)
Nominal Voltage (Volt)
Optimization (rpm)
No-Load Speed (rpm)
No-Load Current (mA)
Max continuous mechanical power (@ 25°C)
Max continuous Current (A)
Max Continuous Torque (mNm)
Max Continuous Torque (oz-in)
Terminal Resistance (W)
Output Power (W)
Stall Torque (oz-in)
Stall Torque (mNm)
Efficiency (%)
Speeds up to (rpm)
Torque up to (oz-in)
Torque up to (mNm)
Current up to (thermal limits)
Torque Constant (mNm/A)
Torque Constant (oz-in/A)
Motor Regulation R/k² (10³/Nms)
Motor regulation k/R½ (mNm/W)
Motor regulation k/R½ (oz-in/W)
Internal resistance - phase to phase (W)
Line to Line resistance at connectors (Ω)
Inductance - phase to phase (mH)
Friction Torque (onz-in)
Friction Torque (mNm)
Rotor Inductance (mH)
Mechanical Time Constant (ms)
Thermal Time Constant (C/W)
Absolute accuracy 2 ph. On, Full step mode (degree)
Ambient Temperature Range, Operating (°C)
Ambient Temperature Range, Operating (°F)
Rotor Operating Temperature Range (°C)
Rotor Operating Temperature Range (°F)
Max motor speed (rpm)
Ambient storage temperature range (°C)
Ambient storage temperature range (°F)
Ball bearings preload (N)
Axial static force without shaft support (N)
Max winding temperature (°C)
Max Winding Temperature (C)
Max Winding Temperature (°F)
Max winding temperature (F)
Hall Sensor Elecrical Phasing (degree)
Typical Housing Material
Continuous Stall Current (A)
Peak Torque for 1s (mNm)
Peak Torque for 1s (oz-in)
Peak Current (A)
Shaft Load Max Axial (lb)
Shaft Load Max Axial (N)
Shaft Load Max Radial (lb)
Shaft Load Max Radial (N)
Min. Holding Force (Unenergized) @ .0005" (0.0127 mm) / Step{%|%}N 50.00 50.00 50.00 50.00
Min. Holding Force (Unenergized) @ .0005" (0.0127 mm) / Step{%|%}oz 180.00 180.00 180.00 180.00
Min. Holding Force @ 0.001" (0.0254 mm) / Step (Un-energized){%|%}N 13.9 13.9 13.9 13.9
Min. Holding Force @ 0.001" (0.0254 mm) / Step (Un-energized){%|%}oz 50.0 50.0 50.0 50.0
Min. Holding Force @ 0.002" (0.0508 mm) / Step (Un-energized){%|%}N 5.5 5.5 5.5 5.5
Min. Holding Force @ 0.002" (0.0508 mm) / Step (Un-energized){%|%}oz 20.0 20.0 20.0 20.0
Min. Holding Force (Unenergized) @ 0.003" (0.0762 mm) / Step (Un-energized){%|%}N
Min. Holding Force (Unenergized) @ 0.003" (0.0762 mm) / Step (Un-energized){%|%}oz
Min. Holding Force @ 0.004" (0.1016 mm) / Step (Un-energized){%|%}N
Min. Holding Force @ 0.004" (0.1016 mm) / Step (Un-energized){%|%}oz
Min. Holding Force @ rated current @ .0005" (0.0127 mm) / Step{%|%}N 50.00 50.00 50.00 50.00
Min. Holding Force @ rated current @ .0005" (0.0127 mm) / Step{%|%}oz 180.00 180.00 180.00 180.00
Min. Holding Force @ rated current @ .001" (0.0254 mm) / Step{%|%}N 35.00 35.00 35.00 35.00
Min. Holding Force @ rated current @ .001" (0.0254 mm) / Step{%|%}oz 126.00 126.00 126.00 126.00
Min. Holding Force @ rated current @ .002" (0.058 mm) / Step{%|%}N 22.00 22.00 22.00 22.00
Min. Holding Force @ rated current @ .002" (0.058 mm) / Step{%|%}oz 79.00 79.00 79.00 79.00
Min. Holding Force @ rated current @ .003" (0.0762 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .003" (0.0762 mm) / Step{%|%}oz
Min. Holding Force @ rated current @ .004" (0.1016 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .004" (0.1016 mm) / Step{%|%}oz
Stroke Length, Typ{%|%}mm 50.0 50.0 50.0 50.0
Stroke Length, Typ{%|%}in 2.0 2.0 2.0 2.0
Steps per Revolution 48 48 48 48
Ambient temperature range, operating{%|%}°C -20° to +70° -20° to +70° -20° to +70° -20° to +70°
Ambient temperature range, operating{%|%}°F -4° to +158° -4° to +158° -4° to +158° -4° to +158°
Maximum Coil Temperature{%|%}°F 266 266 266 266
Maximum Coil Temperature{%|%}°C 130 130 130 130
Bearing Type Ball Bearing Ball Bearing Ball Bearing Ball Bearing
Insulation Resistance at 500 VDC{%|%}Mohms 20 20 20 20
Dielectric Withstanding Voltage{%|%}VAC 650 650 650 650
Number of lines available
Output signal
Supply Current - maxium (mA)
Supply Current - stand-by (μA)
Supply Current - typical (mA)
Supply Voltage (V)
Direction of rotation ( = / ≠)
Max. Recommended Input Speed (rpm)
Number of gear stages
Number of lines available
Thermal Resistance (C/W)
Natural Resonance Frequency @nominal current (Hz)
Electrical time constant (ms)
Angular Acceleration (nominal current)
Radial Shaft Play (µm)
Axial Shaft Play (µm)
Max Radial Shaft Load (oz)
Max Radial Shaft Load (N)
Max Axial Shaft Load (oz)
Max Axial Shaft Load (N)
Weight{%|%}g 35.0 35.0 35.0 35.0
Weight{%|%}oz 1.23 1.23 1.23 1.23
Leadwire
Type of encoder
Power rate, nominal current (kW/s)
Step Angle ±1 Step ±1 Step ±1 Step ±1 Step
Input Power (W) 2.90 2.90 2.90 2.90
Stepper Type Bipolar Bipolar Bipolar Bipolar
Document Technology Document Type Language File Type
20DBM-L规格 直线步进电机 规格说明  
20DBM-L Drawing 直线步进电机 DXF图纸  
20DBM-L 3D Drawing 直线步进电机 3D  
20DBM直线步进电机 (brochure CN) 直线步进电机 文件资料