Products

22ECT60 ULTRA EC

22ECT60 ULTRA EC - 22ECT60 ULTRA EC

22ECT Ultra EC的尺寸设计非常紧凑,与此同时能够提供超高扭矩。最大的功率出现在10k到20k rpm之间,22ECT在中高转速区间做了特定的优化以保证高连续力矩。这些微电机在整个低速区间比相同尺寸的同类无刷直流电机高出两倍的连续力矩,包括使用齿轮系的典型情况.

性能及特点

  • 小尺寸,2种标准长度

  • 专利的线圈设计,高效率

  • 同DC电机相比,获取类似或者更高的力矩,同时拥有更长的使用寿命。

  • 使用4极设计,在这个尺寸的无刷直流电机中拥有最好的力矩能力。

按需求定制

  • 连接器
  • 多种线圈阻抗
  • 轴长度
  • 集成式的温度传感器

典型应用

Hide Reduce Design Time block (check box for SMS products only) 
规格+细节
文件
公制 英制单位
Winding{%|%}unit 22ECT60 10B 9 22ECT60 10B 15 22ECT60 10B 21
Diameter{%|%}in 0.87 0.87 0.87
Diameter{%|%}mm 22 22 22
Length{%|%}in 2.36 2.36 2.36
Length{%|%}mm 60.00 60.00 60.00
Nominal Voltage{%|%}Volt 24.0 24.0 24.0
Optimization Speed 0 0 0
No-Load Speed{%|%}rpm 20,370 12,350 9,180
Typical No-Load Current{%|%}mA 370 170 115
Max continuous mechanical power (@ 25°C){%|%}W 86.0 86.0 86.0
Max continuous Current{%|%}A 5.9 3.6 2.6
Max Continuous Torque{%|%}mNm 65.90 66.90 64.30
Max Continuous Torque{%|%}oz-in 9.33 9.47 9.10
Terminal Resistance{%|%}Ω
Output Power{%|%}W
Stall Torque{%|%}oz-in
Stall Torque{%|%}mNm
Efficiency{%|%}%
Speeds up to{%|%}rpm
Torque up to{%|%}oz-in
Torque up to{%|%}mNm
Current up to{%|%}thermal limits
Back-EMF Constant{%|%}V/1000 rpm 1.16 1.97 2.72
Torque Constant{%|%}mNm/A 11.12 18.77 25.97
Torque Constant{%|%}oz-in/A 1.57 2.66 3.68
Motor Regulation R/k²{%|%}10³/Nms
Motor Constant k/R½{%|%}mNm/W½ 25.5 26.0 25.0
Motor constant k/R½{%|%}oz-in/W½ 3.60 3.70 1.60
Internal resistance - phase to phase{%|%}Ω 0.19 0.52 1.08
Line to Line resistance at connectors{%|%}Ω 0.22 0.55 1.11
Inductance - phase to phase{%|%}mH 0.02 0.06 0.12
Friction Torque{%|%}onz-in
Friction Torque{%|%}mNm
Rotor Inductance (mH)
Mechanical Time Constant{%|%}ms 1.3 1.3 1.4
Electrical time constant{%|%}ms 0.11 0.12 0.11
Max motor speed{%|%}rpm 20,000 20,000 20,000
Ambient working temperature range{%|%}°C -30 to + 100 -30 to + 100 -30 to + 100
Ambient working temperature range{%|%}°F -22 to + 212 -22 to + 212 -22 to + 212
Ambient storage temperature range{%|%}°C -40 to + 100 -40 to + 100 -40 to + 100
Ambient storage temperature range{%|%}°F -40 to + 212 -40 to + 212 -40 to + 212
Ball bearings preload{%|%}N 6.8 6.8 6.8
Axial static force without shaft support{%|%}N 45 45 45
Max Winding Temperature{%|%}°C
Max winding temperature{%|%}°C 125 125 125
Max Winding Temperature{%|%}°F
Max winding temperature{%|%}°F 257 257 257
Thermal Resistance{%|%}°C/W 2.0 / 8.8 2.0 / 8.8 2.0 / 8.8
Thermal Time Constant{%|%}s 980 980 980
Operating Temperature Range{%|%}°F
Weight{%|%}oz 4.34 4.34 4.34
Weight{%|%}g 123 123 123
Rotor Inertia{%|%}gcm²
Rotor Inertia{%|%}gcm² 8.7 8.7 8.7
Typical Housing Material Stainless steel aluminum flanges Stainless steel aluminum flanges Stainless steel aluminum flanges
Hall Sensor Elecrical Phasing{%|%}electrical ° 120 120 120
Absolute accuracy 2 ph. On, Full step mode (degree)
Bearing Type
Detent Torque, Max (mNm)
Detent Torque, Max (oz-in)
Dielectric Withstanding Voltage (VAC)
Holding Torque, MIN (mNm)
Holding Torque, MIN (oz-in)
Inductance per Phase, typ (mH)
Insulation Resistance at 500 VDC (Mohms)
Leadwire
Maximum Coil Temperature (C)
Maximum Coil Temperature (F)
Operating Voltage (VDC)
Rated Current per Phase, 1 Phase ON (A)
Resistance per Phase, ± 10%{%|%}Ohms
Rotor Inertia{%|%}oz-in-sec²10^-6
Continuous Stall Current{%|%}A
Peak Torque for 1s{%|%}mNm
Peak Torque for 1s{%|%}oz-in
Peak Current{%|%}A
Max Axial Shaft Load (N)
Max Axial Shaft Load (oz)
Max Radial Shaft Load (N)
Max Radial Shaft Load (oz)
Shaft Load Max Axial{%|%}lb
Shaft Load Max Axial{%|%}N
Shaft Load Max Radial{%|%}lb
Shaft Load Max Radial{%|%}N
Steps per Revolution
Back EMF Amplitude (V/ksteps/s)
Nominal Phase Current (1 ph. On) (A)
Nominal Phase Current (2 ph. On) (A)
Angular Acceleration (nominal current)
Axial Shaft Play (µm)
Holding Torque Typical (mNm)
Holding Torque Typical (oz-in)
Holding Torque, 1.5x nominal current (mNm)
Holding Torque, 1.5x nominal current (oz-in)
Natural Resonance Frequency @nominal current (Hz)
Power rate (nominal current) (kW/s)
Radial Shaft Play (µm)
Max. Force* @ .001" (0.0254 mm) / Step (N)
Max. Force* @ .001" (0.0254 mm) / Step (oz)
Max. Force* @ .002" (0.0508 mm) / Step (N)
Max. Force* @ .002" (0.0508 mm) / Step (oz)
Max. Force* @ .004"(0.1016 mm) / Step (N)
Max. Force* @ .004"(0.1016 mm) / Step (oz)
Stroke Length, Typ{%|%}mm
Stroke Length, Typ{%|%}in
Min. Holding Force (Unenergized) @ .0005" (0.0127 mm) / Step{%|%}N
Min. Holding Force (Unenergized) @ .0005" (0.0127 mm) / Step{%|%}oz
Min. Holding Force @ 0.001" (0.0254 mm) / Step (Un-energised) (N)
Min. Holding Force @ 0.001" (0.0254 mm) / Step (Un-energised) (oz)
Min. Holding Force @ 0.002" (0.0508 mm) / Step (Un-energised) (N)
Min. Holding Force @ 0.002" (0.0508 mm) / Step (Un-energised) (oz)
Min. Holding Force (Unenergized) @ 0.003" (0.0762 mm) / Step (Un-energized){%|%}N
Min. Holding Force (Unenergized) @ 0.003" (0.0762 mm) / Step (Un-energized){%|%}oz
Min. Holding Force @ 0.004" (0.1016 mm) / Step (Un-energised) (N)
Min. Holding Force @ 0.004" (0.1016 mm) / Step (Un-energised) (oz)
Min. Holding Force @ rated current @ .0005" (0.0127 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .0005" (0.0127 mm) / Step{%|%}oz
Min. Holding Force @ rated current @ .001" (0.0254 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .001" (0.0254 mm) / Step{%|%}oz
Min. Holding Force @ rated current @ .002" (0.058 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .002" (0.058 mm) / Step{%|%)oz
Min. Holding Force @ rated current @ .003" (0.0762 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .003" (0.0762 mm) / Step{%|%}oz
Min. Holding Force @ rated current @ .004" (0.1016 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .004" (0.1016 mm) / Step{%|%}oz
Number of lines available
Output signal
Supply Current - maxium (mA)
Supply Current - stand-by (μA)
Supply Current - typical (mA)
Supply Voltage (V)
Direction of rotation ( = / ≠)
Max. Recommended Input Speed (rpm)
Number of gear stages
Number of lines available
Type of encoder
Linear Travel Accuracy
Input Power (W)
Stepper Type
Gear Ratio
Sterilization Cycles
Prototype Pricing
Document Technology Document Type Language File Type
22ECT60规格 无刷直流电机 规格说明  
22ECT60 Ultra EC Drawing 无刷直流电机 DXF图纸  
22ECT 60 3D Drawing 无刷直流电机 3D