Products

Ultra EC无槽直流无刷电机

16ECP52 ULTRA EC - Ultra EC无槽直流无刷电机

16ECP52 ULTRA EC

无刷无槽直流电机最高连续功率可达30W,转速40,000rpm,缩小您的应用尺寸并优化您的设备性能。

性能及特点

  • 直径16mm的电机尺寸使您的机器设计更紧凑

  • 优化的磁铁设计允许电机最高达到30W连续功率

  • 得益于优化且灵活的机械设计,16ECP可适用于多种应用

  • 专利线圈设计及优化的轴承装置使16ECP电机的转速可高达40,000rpm

  • 带有或不带有霍尔传感器

按需求定制

  • 防尘密封输出电缆
  • 连接器
  • 多种优化方式(速度或运动控制)
  • 多种线圈阻抗

典型应用

Hide Reduce Design Time block (check box for SMS products only) 
规格+细节
文件
公制 英制单位
Winding{%|%}unit 16ECP52 8B 112 16ECP52 8B 220 16ECP52 8B 49
Diameter{%|%}in 0.24 0.24 0.24
Diameter{%|%}mm 16 16 16
Length{%|%}in 2.05 2.05 2.05
Length{%|%}mm 52.00 52.00 52.00
Nominal Voltage{%|%}Volt 24.0 24.0 24.0
Optimization Speed 0 0 0
No-Load Speed{%|%}rpm 12,100 6,144 27,800
Typical No-Load Current{%|%}mA 41 19 134
Max continuous mechanical power (@ 25°C){%|%}W 37.5 37.5 37.5
Max continuous Current{%|%}A 0.8 0.4 2.0
Max Continuous Torque{%|%}mNm 14.30 14.50 16.10
Max Continuous Torque{%|%}oz-in 14.70 1.87 2.10
Terminal Resistance{%|%}Ω
Output Power{%|%}W
Stall Torque{%|%}oz-in
Stall Torque{%|%}mNm
Efficiency{%|%}%
Speeds up to{%|%}rpm
Torque up to{%|%}oz-in
Torque up to{%|%}mNm
Current up to{%|%}thermal limits
Back-EMF Constant{%|%}V/1000 rpm 1.93 3.77 0.84
Torque Constant{%|%}mNm/A 18.40 36.00 8.00
Torque Constant{%|%}oz-in/A 2.61 5.10 1.13
Motor Regulation R/k²{%|%}10³/Nms
Motor Constant k/R½{%|%}mNm/W½ 7.4 7.3 8.1
Motor constant k/R½{%|%}oz-in/W½ 1.05 1.03 1.15
Internal resistance - phase to phase{%|%}Ω 6.20 24.50 0.98
Line to Line resistance at connectors{%|%}Ω 6.30 24.60 1.06
Inductance - phase to phase{%|%}mH 0.60 2.32 0.12
Friction Torque{%|%}onz-in
Friction Torque{%|%}mNm
Rotor Inductance (mH)
Mechanical Time Constant{%|%}ms 1.8 1.9 1.6
Electrical time constant{%|%}ms 0.10 0.10 0.12
Max motor speed{%|%}rpm 40,000 40,000 40,000
Ambient working temperature range{%|%}°C -30 / + 100 -30 / + 100 -30 / + 100
Ambient working temperature range{%|%}°F -22 / + 212 -22 / + 212 -22 / + 212
Ambient storage temperature range{%|%}°C -40 / + 100 -40 / + 100 -40 / + 100
Ambient storage temperature range{%|%}°F -40 / + 212 -40 / + 212 -40 / + 212
Ball bearings preload{%|%}N 5.3 5.3 5.3
Axial static force without shaft support{%|%}N 25 25 25
Max Winding Temperature{%|%}°C
Max winding temperature{%|%}°C 125 125 125
Max Winding Temperature{%|%}°F
Max winding temperature{%|%}°F 257 127 257
Thermal Resistance{%|%}°C/W 3 / 15 3 / 15 3 / 15
Thermal Time Constant{%|%}s 750 750 750
Operating Temperature Range{%|%}°F
Weight{%|%}oz 2.19 2.19 2.19
Weight{%|%}g 62 62 62
Rotor Inertia{%|%}gcm²
Rotor Inertia{%|%}gcm² 1.0 1.0 1.0
Typical Housing Material Stainless steel aluminum flanges Stainless steel aluminum flanges Stainless steel aluminum flanges
Hall Sensor Elecrical Phasing{%|%}electrical ° 120 120 120
Absolute accuracy 2 ph. On, Full step mode (degree)
Bearing Type
Detent Torque, Max (mNm)
Detent Torque, Max (oz-in)
Dielectric Withstanding Voltage (VAC)
Holding Torque, MIN (mNm)
Holding Torque, MIN (oz-in)
Inductance per Phase, typ (mH)
Insulation Resistance at 500 VDC (Mohms)
Leadwire
Maximum Coil Temperature (C)
Maximum Coil Temperature (F)
Operating Voltage (VDC)
Rated Current per Phase, 1 Phase ON (A)
Resistance per Phase, ± 10%{%|%}Ohms
Rotor Inertia{%|%}oz-in-sec²10^-6
Continuous Stall Current{%|%}A
Peak Torque for 1s{%|%}mNm
Peak Torque for 1s{%|%}oz-in
Peak Current{%|%}A
Max Axial Shaft Load (N)
Max Axial Shaft Load (oz)
Max Radial Shaft Load (N)
Max Radial Shaft Load (oz)
Shaft Load Max Axial{%|%}lb
Shaft Load Max Axial{%|%}N
Shaft Load Max Radial{%|%}lb
Shaft Load Max Radial{%|%}N
Steps per Revolution
Back EMF Amplitude (V/ksteps/s)
Nominal Phase Current (1 ph. On) (A)
Nominal Phase Current (2 ph. On) (A)
Angular Acceleration (nominal current)
Axial Shaft Play (µm)
Holding Torque Typical (mNm)
Holding Torque Typical (oz-in)
Holding Torque, 1.5x nominal current (mNm)
Holding Torque, 1.5x nominal current (oz-in)
Natural Resonance Frequency @nominal current (Hz)
Power rate (nominal current) (kW/s)
Radial Shaft Play (µm)
Max. Force* @ .001" (0.0254 mm) / Step (N)
Max. Force* @ .001" (0.0254 mm) / Step (oz)
Max. Force* @ .002" (0.0508 mm) / Step (N)
Max. Force* @ .002" (0.0508 mm) / Step (oz)
Max. Force* @ .004"(0.1016 mm) / Step (N)
Max. Force* @ .004"(0.1016 mm) / Step (oz)
Stroke Length, Typ{%|%}mm
Stroke Length, Typ{%|%}in
Min. Holding Force (Unenergized) @ .0005" (0.0127 mm) / Step{%|%}N
Min. Holding Force (Unenergized) @ .0005" (0.0127 mm) / Step{%|%}oz
Min. Holding Force @ 0.001" (0.0254 mm) / Step (Un-energised) (N)
Min. Holding Force @ 0.001" (0.0254 mm) / Step (Un-energised) (oz)
Min. Holding Force @ 0.002" (0.0508 mm) / Step (Un-energised) (N)
Min. Holding Force @ 0.002" (0.0508 mm) / Step (Un-energised) (oz)
Min. Holding Force (Unenergized) @ 0.003" (0.0762 mm) / Step (Un-energized){%|%}N
Min. Holding Force (Unenergized) @ 0.003" (0.0762 mm) / Step (Un-energized){%|%}oz
Min. Holding Force @ 0.004" (0.1016 mm) / Step (Un-energised) (N)
Min. Holding Force @ 0.004" (0.1016 mm) / Step (Un-energised) (oz)
Min. Holding Force @ rated current @ .0005" (0.0127 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .0005" (0.0127 mm) / Step{%|%}oz
Min. Holding Force @ rated current @ .001" (0.0254 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .001" (0.0254 mm) / Step{%|%}oz
Min. Holding Force @ rated current @ .002" (0.058 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .002" (0.058 mm) / Step{%|%)oz
Min. Holding Force @ rated current @ .003" (0.0762 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .003" (0.0762 mm) / Step{%|%}oz
Min. Holding Force @ rated current @ .004" (0.1016 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .004" (0.1016 mm) / Step{%|%}oz
Number of lines available
Output signal
Supply Current - maxium (mA)
Supply Current - stand-by (μA)
Supply Current - typical (mA)
Supply Voltage (V)
Direction of rotation ( = / ≠)
Max. Recommended Input Speed (rpm)
Number of gear stages
Number of lines available
Type of encoder
Linear Travel Accuracy
Input Power (W)
Stepper Type
Gear Ratio
Sterilization Cycles
Prototype Pricing
Document Technology Document Type Language File Type
16ECP52 Ultra EC Drawing 无刷直流电机 DXF图纸  
16ECP52规格 无刷直流电机 规格说明  
利用 Portescap 的 UltraECTM 16ECP 无刷直流电机提升您的应用 (white paper: CN) 无刷直流电机 白皮书  
Portescap 推出新一代创新产品:全新的高性能 16 毫米 ECP 无刷无槽电机 (press release: CN) 无刷直流电机 新闻稿  
Ultra EC 16ECP (press release CN) 无刷直流电机 文件资料  
16ecp52 3D drawing 无刷直流电机 3D