Products

PH010 064

PH010 064 - PH010 064

PH010 064 盘式步进电机提供了市场上其它小直径步进电机无法提供的独特的动态性能。独一无二的扁平盘式磁铁在一个给定尺寸中实现了同传统步进电机相比更精细的步进分辨率,显著的更高的加速度和更高的最大速度。

性能及特点

  • 精确 - 特别适合微步进

  • 速度快 - 涡轮盘步进电机在保持准确定位的条件下提供了所有步进电机中最高的加速度和最高的极限速度

  • 独特 - 低定位扭矩、高度可定制

  • 可调 - 每转步数比类似直径的步进电机多

按需求定制

  • 滑动或滚珠轴承
  • 各种绕组
  • 轴定制 - 加长/缩短长度、滚花
  • 加长引线,连接器
  • 齿轮箱能够提高扭矩
  • 编码器能够提供位置确认
  • 丝杆轴

典型应用

  • 医用移液器
  • 临床诊断微型电机应用

  • 仪器仪表微型电机应用

  • 条码扫描仪微型电机应用

  • 光学衰减器微型电机应用

Hide Reduce Design Time block (check box for SMS products only) 
规格+细节
文件
公制 英制单位
Winding{%|%}unit PH010 064 003 02 PH010 064 010 02 PH010 064 020 02
Diameter{%|%}in 0.04 0.04 0.04
Diameter{%|%}mm 10 10 10
Length{%|%}mm
Length{%|%}in
Operating Voltage (VDC)
Resistance per Phase, ± 10%{%|%}Ohms 3.0 10.0 19.0
Inductance per Phase, typ{%|%}mH 1.3 4.2 8.4
Nominal Phase Current, 2 ph. On{%|%}A 0.37 0.20 0.15
Nominal Phase Current, 1 ph. On{%|%}A 0.52 0.28 0.21
Back-EMF Constant{%|%}V/1000 rpm
Back EMF Amplitude{%|%}V/ksteps/s 1.2 2.3 3.0
Holding Torque, MIN (mNm)
Holding Torque, MIN (oz-in)
Holding Torque, Typical{%|%}mNm 2.4 2.4 2.4
Holding Torque, Typical{%|%}oz-in 0.34 0.34 0.34
Holding Torque, 1.5x nominal current{%|%}mNm 3.6 3.6 3.6
Holding Torque, 1.5x nominal current{%|%}oz-in 1.51 0.51 0.51
Detent Torque, Typical{%|%}mNm 1.10 1.10 1.10
Detent Torque, Typical{%|%}oz-in 0.16 0.16 0.16
Rated Current per Phase, 1 Phase ON (A)
Detent Torque, Max (mNm)
Detent Torque, Max (oz-in)
Rotor Inertia{%|%}kgm²10{%SUP%}-7{%/SUP%}
Rotor Inertia{%|%}oz-in-sec²10{%SUP%}-3{%/SUP%} 0.07 0.07 0.07
Nominal Voltage (Volt)
Optimization (rpm)
No-Load Speed (rpm)
No-Load Current (mA)
Max continuous mechanical power (@ 25°C)
Max continuous Current (A)
Max Continuous Torque (mNm)
Max Continuous Torque (oz-in)
Terminal Resistance (W) 100.00 100.00 100.00
Output Power (W)
Stall Torque (oz-in)
Stall Torque (mNm)
Efficiency (%)
Speeds up to (rpm)
Torque up to (oz-in)
Torque up to (mNm)
Current up to (thermal limits)
Torque Constant (mNm/A)
Torque Constant (oz-in/A)
Motor Regulation R/k² (10³/Nms)
Motor regulation k/R½ (mNm/W)
Motor regulation k/R½ (oz-in/W)
Internal resistance - phase to phase (W)
Line to Line resistance at connectors (Ω)
Inductance - phase to phase (mH)
Friction Torque (onz-in)
Friction Torque (mNm)
Rotor Inductance (mH)
Mechanical Time Constant (ms)
Thermal Time Constant (C/W)
Absolute accuracy 2 ph. On, Full step mode{%|%}% +/- 5% +/- 5% +/- 5%
Steps per Revolution 24 24 24
Ambient Temperature Range (°C)
Operating Temperature Range (°F)
Rotor Operating Temperature Range (°C)
Rotor Operating Temperature Range (°F)
Ambient temperature range (operating){%|%}°C -20 to 55 -20 to 54 -20 to 53
Ambient temperature range (operating){%|%}°F -4 to 127 -4 to 126 -4 to 125
Insulation Resistance at 500 VDC (Mohms)
Leadwire
Max motor speed (rpm)
Ambient storage temperature range (°C)
Ambient storage temperature range (°F)
Ball bearings preload (N)
Axial static force without shaft support (N)
Max winding temperature (C)
Max Winding Temperature (C)
Max Winding Temperature (F)
Max winding temperature (F)
Hall Sensor Elecrical Phasing (degree)
Typical Housing Material
Continuous Stall Current (A)
Peak Torque for 1s (mNm)
Peak Torque for 1s (oz-in)
Peak Current (A)
Shaft Load Max Axial (lb)
Shaft Load Max Axial (N)
Shaft Load Max Radial (lb)
Shaft Load Max Radial (N)
Max. Force* @ .001" (0.0254 mm) / Step (N)
Max. Force* @ .001" (0.0254 mm) / Step (oz)
Max. Force* @ .002" (0.0508 mm) / Step (N)
Max. Force* @ .002" (0.0508 mm) / Step (oz)
Max. Force* @ .004"(0.1016 mm) / Step (N)
Max. Force* @ .004"(0.1016 mm) / Step (oz)
Stroke Length, Typ{%|%}mm
Stroke Length, Typ{%|%}in
Min. Holding Force (Unenergized) @ .0005" (0.0127 mm) / Step{%|%}N
Min. Holding Force (Unenergized) @ .0005" (0.0127 mm) / Step{%|%}oz
Min. Holding Force @ 0.001" (0.0254 mm) / Step (Un-energised) (N)
Min. Holding Force @ 0.001" (0.0254 mm) / Step (Un-energised) (oz)
Min. Holding Force @ 0.002" (0.0508 mm) / Step (Un-energised) (N)
Min. Holding Force @ 0.002" (0.0508 mm) / Step (Un-energised) (oz)
Min. Holding Force (Unenergized) @ 0.003" (0.0762 mm) / Step (Un-energized){%|%}N
Min. Holding Force (Unenergized) @ 0.003" (0.0762 mm) / Step (Un-energized){%|%}oz
Min. Holding Force @ 0.004" (0.1016 mm) / Step (Un-energised) (N)
Min. Holding Force @ 0.004" (0.1016 mm) / Step (Un-energised) (oz)
Min. Holding Force @ rated current @ .0005" (0.0127 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .0005" (0.0127 mm) / Step{%|%}oz
Min. Holding Force @ rated current @ .001" (0.0254 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .001" (0.0254 mm) / Step{%|%}oz
Min. Holding Force @ rated current @ .002" (0.058 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .002" (0.058 mm) / Step{%|%}oz
Min. Holding Force @ rated current @ .003" (0.0762 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .003" (0.0762 mm) / Step{%|%}oz
Min. Holding Force @ rated current @ .004" (0.1016 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .004" (0.1016 mm) / Step{%|%}oz
Number of lines available
Output signal
Supply Current - maxium (mA)
Supply Current - stand-by (μA)
Supply Current - typical (mA)
Supply Voltage (V)
Direction of rotation ( = / ≠)
Max. Recommended Input Speed (rpm)
Number of gear stages
Number of lines available
Maximum Coil Temperature{%|%}°C 130 130 130
Maximum Coil Temperature{%|%}°F 266 266 266
Thermal Resistance{%|%}°C/W
Natural Resonance Frequency @nominal current{%|%}Hz 276 276 276
Electrical time constant{%|%}ms 0.4 0.4 0.4
Angular Acceleration (nominal current){%|%}rad/s2 343,775 343,775 343,775
Bearing Type Ball Ball Ball
Dielectric Withstanding Voltage{%|%}VAC 505 VRMS for 5 seconds 504 VRMS for 5 seconds 503 VRMS for 5 seconds
Radial Shaft Play{%|%}µm 30@2N 30@2N 30@2N
Axial Shaft Play{%|%}µm 40@2N 40@2N 40@2N
Max Radial Shaft Load{%|%}oz 2.5 2.5 2.5
Max Radial Shaft Load{%|%}N 9 9 9
Max Axial Shaft Load{%|%}oz 9 9 9
Max Axial Shaft Load{%|%}N 2.5 2.5 2.5
Weight{%|%}g 9.0 9.0 9.0
Weight{%|%}oz 0.3 0.3 0.3
Type of encoder
Power rate, nominal current{%|%}kW/s 0.5 0.5 0.5
Linear Travel Accuracy 15 15 15
Input Power (W)
Stepper Type
Document Technology Document Type Language File Type
PH010 064 drawing 涡轮盘步进电机 DXF图纸  
PH010064规格 永磁步进电机 规格说明  
PH010 064 3D Drawing 涡轮盘步进电机 3D