Products

高效有刷直流电动机

35NT2R82 - 高效有刷直流电动机

35NT2R82

35NT2R82 有刷直流电机具有高功率密度,它使用石墨/铜换向系统,能够在保证长电刷使用寿命的同时提供高加速度。这种电机能够提供高达 150 mNm 的连续转矩和高达 85% 的效率。

性能及特点

  • 空心杯构造

  • 钕磁铁提供高性能

  • 高功率密度

  • 石墨/铜换向器

  • 长电刷寿命

  • 紧凑的设计

  • 绕组选项

  • 高加速度

  • 发热低

按需求定制

  • 轴长度
  • 特殊线圈
  • 电缆和连接器
  • 滚珠轴承
  • 固定孔

典型应用

规格+细节
文件
公制 英制单位
Winding{%|%}unit 35NT2R82-426P.1 35NT2R82-226E.1 35NT2R82-426SP.1 35NT2R82-426E.1
Diameter{%|%}in 1.38 1.38 1.38 1.38
Diameter{%|%}mm 35 35 35 35
Nominal Voltage{%|%}V 18.0 28.0 32.0 60.0
Optimization{%|%}rpm
No-Load Speed{%|%}rpm 6,765 6,935 5,850 5,760
Type
Resolution{%|%}line counts
Supply Voltage{%|%}V
Supply Current - typical{%|%}mA
Supply Current - maxium{%|%}mA
Supply Current - stand-by{%|%}μA
Rise time{%|%}ns
Fall time{%|%}ns
No-Load Current{%|%}mA 141.0 80.0 80.0 40.0
Max continuous mechanical power{%|%}@ 25°C
Max continuous Current{%|%}A
Max Continuous Torque{%|%}mNm
Max Continuous Torque{%|%}oz-in
Terminal Resistance{%|%}Ω 0.6 1.6 2.2 7.7
Output Power{%|%}W 102.0 91.0 103.0 107.0
Stall Torque{%|%}oz-in 117.25 95.73 107.06 110.74
Stall Torque{%|%}mNm 828.00 676.00 756.00 782.00
Efficiency{%|%}% 87 87 86 86
Speeds up to{%|%}rpm 9,000 9,000 9,000 9,000
Torque up to{%|%}oz-in 15.29 13.74 15.44 16.14
Torque up to{%|%}mNm 108.00 97.00 109.00 114.00
Current up to, thermal limits{%|%}Amp 4.40 2.60 2.20 1.19
Back-EMF Constant{%|%}V/1000 rpm 2.65 4.02 5.45 10.37
Torque Constant{%|%}mNm/A 25.3 38.4 52.0 99.0
Torque Constant{%|%}oz-in/A 3.58 5.44 7.36 14.02
Motor Regulation R/k²{%|%}10³/Nms 1 1 1 1
Motor regulation k/R½{%|%}mNm/W
Motor regulation k/R½{%|%}oz-in/W
Internal resistance - phase to phase (W)
Line to Line resistance at connectors (Ω)
Inductance - phase to phase (mH)
Friction Torque{%|%}oz-in 0.506 0.435 0.589 0.561
Friction Torque{%|%}mNm 3.57 3.07 4.16 3.96
Rotor Inductance{%|%}µH 100 220 400 1,700
Mechanical Time Constant{%|%}ms 6.0 6.0 6.0 5.0
Rotor Inertia{%|%}gcm²
Rotor Inertia{%|%}gcm² 71.400 54.000 71.400 71.400
Thermal Resistance{%|%}C/W 4/8 4/8 4/8 4/8
Thermal Time Constant{%|%}C/W 40/920 40/920 40/920 40/920
Weight{%|%}oz 10.93 10.93 10.93 10.93
Weight{%|%}g 310.0 310.0 310.0 310.0
Absolute accuracy 2 ph. On, Full step mode (degree)
Ambient working temperature range (C)
Ambient working temperature range (F)
Bearing Type
Detent Torque, Max (mNm)
Detent Torque, Max (oz-in)
Dielectric Withstanding Voltage (VAC)
Holding Torque, MIN (mNm)
Holding Torque, MIN (oz-in)
Inductance per Phase, typ (mH)
Insulation Resistance at 500 VDC (Mohms)
Leadwire
Maximum Coil Temperature (C)
Maximum Coil Temperature (F)
Operating Voltage (VDC)
Rated Current per Phase, 1 Phase ON (A)
Resistance per Phase, ± 10% (Ohms)
Rotor Inertia (oz-in-sec²10{%SUP%}-6{%/SUP%})
Electrical time constant (ms)
Max motor speed (rpm)
Ambient storage temperature range (C)
Ambient storage temperature range (F)
Ball bearings preload (N)
Axial static force without shaft support (N)
Max winding temperature (C)
Max Winding Temperature (C)
Max Winding Temperature (F)
Max winding temperature (F)
Hall Sensor Elecrical Phasing (degree)
Typical Housing Material
Continuous Stall Current (A)
Peak Torque for 1s (mNm)
Peak Torque for 1s (oz-in)
Peak Current (A)
Max Axial Shaft Load (N)
Max Axial Shaft Load (oz)
Max Radial Shaft Load (N)
Max Radial Shaft Load (oz)
Shaft Load Max Axial (lb)
Shaft Load Max Axial (N)
Shaft Load Max Radial (lb)
Shaft Load Max Radial (N)
Length (in)
Length (mm)
Steps per Revolution
Back EMF Amplitude (V/ksteps/s)
Nominal Phase Current (1 ph. On) (A)
Nominal Phase Current (2 ph. On) (A)
Angular Acceleration (nominal current)
Axial Shaft Play (µm)
Holding Torque Typical (mNm)
Holding Torque Typical (oz-in)
Holding Torque, 1.5x nominal current (mNm)
Holding Torque, 1.5x nominal current (oz-in)
Natural Resonance Frequency @nominal current (Hz)
Power rate (nominal current) (kW/s)
Radial Shaft Play (µm)
Max. Force* @ .001" (0.0254 mm) / Step (N)
Max. Force* @ .001" (0.0254 mm) / Step (oz)
Max. Force* @ .002" (0.0508 mm) / Step (N)
Max. Force* @ .002" (0.0508 mm) / Step (oz)
Max. Force* @ .004"(0.1016 mm) / Step (N)
Max. Force* @ .004"(0.1016 mm) / Step (oz)
Stroke Length, Typ{%|%}mm
Stroke Length, Typ{%|%}in
Min. Holding Force (Unenergized) @ .0005" (0.0127 mm) / Step{%|%}N
Min. Holding Force (Unenergized) @ .0005" (0.0127 mm) / Step{%|%}oz
Min. Holding Force @ 0.001" (0.0254 mm) / Step (Un-energised) (N)
Min. Holding Force @ 0.001" (0.0254 mm) / Step (Un-energised) (oz)
Min. Holding Force @ 0.002" (0.0508 mm) / Step (Un-energised) (N)
Min. Holding Force @ 0.002" (0.0508 mm) / Step (Un-energised) (oz)
Min. Holding Force (Unenergized) @ 0.003" (0.0762 mm) / Step (Un-energized){%|%}N
Min. Holding Force (Unenergized) @ 0.003" (0.0762 mm) / Step (Un-energized){%|%}oz
Min. Holding Force @ 0.004" (0.1016 mm) / Step (Un-energised) (N)
Min. Holding Force @ 0.004" (0.1016 mm) / Step (Un-energised) (oz)
Min. Holding Force @ rated current @ .0005" (0.0127 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .0005" (0.0127 mm) / Step{%|%}oz
Min. Holding Force @ rated current @ .001" (0.0254 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .001" (0.0254 mm) / Step{%|%}oz
Min. Holding Force @ rated current @ .002" (0.058 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .002" (0.058 mm) / Step{%|%}oz
Min. Holding Force @ rated current @ .003" (0.0762 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .003" (0.0762 mm) / Step{%|%}oz
Min. Holding Force @ rated current @ .004" (0.1016 mm) / Step{%|%}N
Min. Holding Force @ rated current @ .004" (0.1016 mm) / Step{%|%}oz
Output signal{%|%}MHz
Direction of rotation ( = / ≠)
Max. Recommended Input Speed (rpm)
Number of gear stages
Electrical phase shift{%|%}degree
Duty cycle{%|%}%
Maximum count frequency{%|%}kHz
Maximum speed @ 512 ppr{%|%}10{%SUP%}-7{%/SUP%} x kgm²
Maximum speed @ 1024 ppr{%|%}10{%SUP%}-7{%/SUP%} x kgm²
Operating Temperature Range: Rotor{%|%}°C 100C 100C 100C 100C
Operating Temperature Range: Motor{%|%}°C -30C to 85C -30C to 85C -30C to 85C -30C to 85C
Operating Temperature Range: Motor{%|%}°F -22F to 185F -22F to 185F -22F to 185F -22F to 185F
Operating Temperature Range: Rotor{%|%}°F 212F 212F 212F 212F
Code wheel moment of inertia{%|%}10{%SUP%}-7{%/SUP%} x kgm²
Linear Travel Accuracy
Input Power (W)
Input Power (W)
Stepper Type
Document Technology Document Type Language File Type
35NT 82 single shaft (main) drawing 有刷直流电机 DXF图纸  
35NT 82 double shaft (secondary) drawing 有刷直流电机 DXF图纸  
35NT2R82 Specification Sheet 有刷直流电机 规格说明  
35nt2r82 3D drawing 有刷直流电机 3D  
35nt2r82_226e 3D drawing 有刷直流电机 3D